FAQs

FAQ/011 KAM-500: Is it possible to replace the Compact Flash card in a KAD/MEM/004 Module?

August 18, 2014

Yes. Curtiss-Wright recommends sending the module under RMA to replace the CompactFlash card.

The CompactFlash card can also be replaced on-site under some special conditions and considering the following:

  • Curtiss-Wright runs Production and ATP tests on the KAD/MEM/004 before shipment, therefore if the CompactFlash card is replaced on-site Curtiss-Wright can't guarantee that it will work (even if the manufacturer of the CompactFlash card is the same).
     
  • Same capacity CompactFlash: It's possible to change the CompactFlash in the KAD/MEM/004 for a CompactFlash of the same capacity.
     
  • Different capacity CompactFlash: It's possible to change the CompactFlash for a CompactFlash of different capacity but it also requires also a change of the module type. The capacity of the CompactFlash must match the capacity of one of the KAD/MEM/004 supported by KSM-500 Software.

Share This Article

  • Share on Linkedin
  • Share on Twitter
  • Share on Facebook
  • Share on Google+
Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic