FAQs

FAQ/046 KSM-500: I’m using a KSM-500 software version for which the KAD/ADC/113/B is not supported. Could I reprogram the module type to a KAD/ADC/113?

August 18, 2014

Yes. Please contact support to get the instructions how to reprogram the module type.

The matrix of modules that have the successors with the same EEPROM setup, backplane register set and backplane timings as its predecessor is shown below. From the software’s point of view, the modules for which the only difference is the module type are:

KAD/ADC/113 => KAD/ADC/113/B
KAM/MEM/103 => KAM/MEM/103/B
KAD/ADC/105 => KAD/ADC/105/B
KAD/ADC/109/B/S1 => KAD/ADC/109/C/S1
KAD/ADC/109/B/S2 => KAD/ADC/109/C/S2
KAD/ADC/106/B => KAD/ADC/106/C
KAD/ADC/109/B/QB350 => KAD/ADC/109/C/QB350
KAD/BCU/101/B => KAD/BCU/101/C
KAD/DAC/001 => KAD/DAC/001/B
KAM/TCG/102/B => KAD/MSB/103/B
KAD/MSB/103 => KAM/TCG/102/C
KAD/BCU/105/B => KAD/BCU/105/C
KAD/UTL/102 => KAD/UTL/102/X1
KAD/UTL/102/X1 => KAD/UTL/102/X2
KAD/ADC/011/B => KAD/ADC/011/C
KAD/ADC/117 => KAD/ADC/117/B
KAD/ADC/126 => KAD/ADC/126/B
KAD/EBM/101 => KAD/EBM/101/B

Please refer to the module datasheet to know the difference between the actual module and its predecessor.

 

Share This Article

  • Share on Linkedin
  • Share on Twitter
  • Share on Facebook
  • Share on Google+
Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic