Articles

The Advantages of Netbooting for Embedded Systems

September 01, 2017 | BY: Paul Davis

Published in Military Embedded Systems

As a greater number of intelligent systems are deployed on platforms such as ground vehicles, aircraft, unmanned aerial vehicles (UAVs), and unmanned undersea vehicles (UUVs), it becomes increasingly challenging to ensure that each of the platform’s multiple embedded computers has been updated with the latest and correct version of runtime and/or mission software. Unfortunately, the process of installing the required software onto an embedded module or intelligent system can be labor- and cost-intensive.

There are two basic options for booting an embedded system: either boot from a dedicated hard drive or remotely across Ethernet, via a netboot protocol. When booting is conducted via a dedicated hard drive (typically residing on the module itself), updating software requires that the subsystem chassis be removed from the platform. Next, the box needs to be opened to remove the module, which is then placed into another system, such as a test jig, whereupon the new software is installed. Many embedded modules write-protect onboard nonvolatile memory through use of a backplane pin that prevents writing any new data to the on-card drive. While write-protection ensures that the embedded software can’t be inadvertently modified while installed, it also makes the chore of updating software more difficult. The process also increases the risk to critical hardware that results every time a module is removed and handled by a technician.

Netbooting>provides a superior alternative solution for installing and updating software that delivers huge labor savings. In addition, netbooting can also greatly enhance the security of data at rest if the platform is lost and captured by an adversary.

As the number of platforms involved in a mission increases, such as a swarm of UAVs or UUVs, the benefits of netbooting – including time, labor, and cost – become even more significant. Netbooting eliminates the need to individually install the software on each and every embedded computer on a platform, whether it’s a module or a standalone box. Instead, all of the relevant software, from the runtime software to the mission maps – as well as any other software needed for a specific mission – can simply be consolidated in storage on a server that functions as a network file system (NFS).

When any of a platform’s embedded systems start up, rather than using its own internal software, booting occurs over the network. Instead of loading software to each individual computer, the system developer or field technician simply uploads the software to a single file server, and as each machine on the network “wakes up” it obtains its software from that server. Consolidating the boot software (along with however many copies of software are needed for the platform’s other embedded systems) onto a single server reduces labor during both deployment and maintenance.

Figure 1: The DTS1 Data Recorder subsystem from Curtiss-Wright – which supports Intel’s PXE Boot netbooting protocol – can function as a networked server that hosts and protects all of the software for a platform’s embedded computers.

Even better, if the server used for netbooting also provides encryption for data at rest, the runtime software used to boot all of the platform’s embedded computers will be secured from prying eyes. Without encryption, if a vehicle outfitted with multiple embedded computers gets captured, the deployed software on each module or system is susceptible to intrusion, potentially enabling it to be reverse-engineered. In contrast, if the software resides on a single server that encrypts all of its data, the likelihood of malicious access is eliminated or greatly reduced. Using netbooting can limit the potential points of intrusion to just a single point – an encrypted server protected with higher levels of security.

Using a netbooting protocol – such as Intel’s PXE Boot protocol – enables system designers to build a fortress around their platform’s network server to ensure that critical data is secured if the platform is lost. (Figure 1.) As the number of deployed intelligent systems continues to proliferate, netbooting can greatly reduce the time, cost, and labor of loading software during development and updating software after the platform is fielded.

Read the full article here

Author’s Biography

Paul Davis

Director, Product Management - Data Solutions

Paul Davis began his career for Curtiss-Wright as a Research Manager for the Dayton, OH facility in 1997. Paul has held positions including: Director of Engineering managing a staff of 40+ engineers, managers, technicians, and co-op students; Product Manager for the switches, recorders, and various board level products; and now Director of Product Management. Prior to joining Curtiss-Wright, Paul worked in engineering and engineering management positions for 19 years.

Share This Article

  • Share on Linkedin
  • Share on Twitter
  • Share on Facebook
  • Share on Google+
Want to add a comment? Please login
Loading...
Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic