Parvus DuraCOR 80-40 2nd gen Core i7 Mission Computer

• High Performance CPU: Intel 2nd Generation Core i7 (Sandy Bridge) Processor, 2.2 GHz , Dual-Core, 8 GB DRAM with Integrated GPU and Advanced Vector Extensions (AVX) Signal Processing
• Connectivity & I/O
  • 2x Gigabit Ethernet 10/100/1000 Mbps LAN Interfaces
  • 6x USB 2.0, 2x RS-232 Serial, 16x Discrete DIO
  • Dual Video Output (VGA, HDMI), Stereo Audio, PS2
  • Dual Slots for Removable 2.5" SATA Solid State Disks (on Rear)
  • Other I/O Configurations by Special Order (i.e. MIL-STD-1553/ARINC429/Ethernet Switch/Video Encoders, FPGA/DSP Modules, Analog/Digital I/O)
• Rugged Mechanical Design
  • Qual Tested to MIL-STD-810G/DO-160G Shock, Vibration, Thermal, Altitude, Humidity
  • -40 to +71C Fanless Extended Temp Operation with No Moving Parts
  • Corrosion-Resistant, Aluminum Chassis Sealed Against Water, Dust, EMI
  • Sealed, Hinged Panel on Rear for Dual Removable SATA SSD Storage
  • Circular MIL-DTL-38999 Connectors for Reliable I/O Connections
  • Filtered, Transient-Protected Power Supply for Aircraft and Vehicle Use
  • Qual Tested to MIL-STD-461F Conducted/Radiated Emissions & Susceptibility
  • Conformal Coating for Humidity/Tin-Whisker Mitigation
  • Flexible / Robust Mounting – Base Flange Mount or Side Boss Mount
• Modular/Expandable
  • Modular Interlocking Chassis Design Supports Stackable PCIe104 I/O Card Expansion for High Speed Interconnect (2-3 Card Slots Per Expansion Chassis Segment)
  • Pre-Installed MIL-DTL-38999 Connectors and Internal Power/Control Bus Enable Integration of PCIe/104 or PCI/104-Express Cards by Factory
  • Factory Mateable w/DuraMAR 5915 Router for Computer + Router + Switch Appliance

Ordering Information

The Parvus DuraCOR 80-40 is a rugged Commercial-Off the Shelf (COTS) tactical mission computer subsystem based on the high performance Intel Core i7 Sandy Bridge processor with a high-speed, stackable PCI-Express bus (PCIe/104) architecture for I/O card expansion. Optimally designed for size, weight, and power (SWaP)-sensitive mobile, airborne, ground, manned or unmanned vehicle applications, the DuraCOR 80-40 combines powerful graphics and multi-core processing with ultra-reliable mechanical robustness and modular I/O expansion for extreme environmental (thermal, shock, vibration, dust, water, humidity) and EMI performance per MIL-STD-810G, DO-160G and MIL-STD-461F.

Delivering new capabilities for C4ISR command & control, image processing and surveillance requirements, the DuraCOR 8040 features modular interlocking chassis segments with pre-installed MIL-DTL-38999 connectors and an internal power/control bus to ease the integration of application-specific PCIe/104 or PCI/104-Express I/O cards and meet high-speed mission payload I/O requirements. Standard I/O includes 2x Gigabit Ethernet, 6x USB, 2x RS232, 16-bit GPIO, dual display outputs (VGA, HDMI), stereo audio, PS2, and a stackable PCIe/104 bus. The unit mounts either horizontally or vertically and supports factory integration of the Cisco IOS-managed DuraMAR 5915 router and/or application I/O into a single appliance combination of computer + router + switch + application I/O. The DuraCOR 80-40 is completely sealed (IP67), requires no active cooling, includes a military-grade power supply supporting aircraft (MIL-STD-704F) and ground vehicle (MIL-STD-1275D) voltages, and features a hinged panel on the rear with two slots for removable, high capacity 2.5" SATA Solid State Disks (SSD).

Like other Parvus DuraCOR mission computer products, the DuraCOR 80-40 features a modular, expandable design based on open architecture rugged embedded technologies. This rugged subsystem features electrical/mechanical I/O expansion capabilities that enable rapid subsystem integration of platform-specific I/O interfaces. Well suited for tailoring to specific programs requirements, these DuraCOR computers leverage a large ecosystem of rugged PC104 modules together with Curtiss-Wright’s responsive and cost competitive application engineering services to deliver Modified COTS (MCOTS) subsystems in a few short weeks without a traditional NRE fee. Please consult with your sales representative or application engineer to discuss your specific requirements.