VPX3-1708 & V3-1708 DO-254 Certifiable 3U VPX Processor Cards

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Key Features

  • NXP LX2160A Arm Cortex A72 16-core 64-bit Processor
  • Dual 64-bit memory controllers with ECC providing up to 32 GB DDR4 SDRAM
  • 80 GB Flash SSD (SLC)
  • 1 MB byte addressable non-volatile memory
  • 4-lane PCIe® XMC expansion site
  • Rugged conduction cooled with 2LM covers
  • Operating system support:
    • DDC-I Deos
    • Green Hills Software INTEGRITY-178 tuMP
    • Lynx Software Technologies LynxOS
    • Wind River VxWorks HVP

Applications

  • Military and aerospace general computing and mission processing
  • Fixed wing aircraft and rotorcraft, both manned and unmanned
  • Systems where A(M)C 20-152A is the means of compliance (RTCA DO-254/EUROCAE ED-80 DAL A)
VPX3-717 DO-254 and DO-178C Safety Certifiable 3U VPX AMD E8860 Graphics Processor

VPX3-717 DO-254 and DO-178C Safety Certifiable 3U VPX/OpenVPX AMD E8860 Graphics Processor

The VPX3-717 is an industry-leading rugged 3U OpenVPX, high performance graphics processor based on the AMD Radeon E8860 Graphics Processing Unit (GPU). The E8860 meets the long lifecycle...

V3-611 DO-254 Safety-Certifiable I/O Module

V3-611 DO-254 Safety-Certifiable I/O Module

Reduce the risk, development time, and cost associated with designing I/O solutions for systems with DO-254 requirements. The V3-611 is a safety-certifiable variant of the field-proven VPX3-611,...

V3-152 DO-254 DAL A Safety-Certifiable Single Board Computer

V3-152 DO-254 DAL A Safety-Certifiable Single Board Computer

Reduce the risk, development time, and cost associated with designing DO-254 safety-certifiable hardware. The V3-152 is a safety-certifiable variant of the field-proven VPX3-152, delivered with...

Arm processor, Do-254

VPX3-1703 3U VPX SBC with NXP LS1043A Arm Processor

Curtiss-Wright’s VPX3-1703 is the latest OpenVPX™-compliant 3U processor that combines the high performance of the NXP® Layerscape® LS1043A Arm® quad-core A53 processor with advanced I/O...

CONTACT SALES/SUPPORT


We’d like to keep in touch and send you updates on our products, news and developments – please tick below to make sure you don’t miss out. You can unsubscribe at any time by clicking on the unsubscribe link at the bottom of the emails. Your personal information will not be shared with any person or organization outside of Curtiss-Wright. Review our privacy policy.

3U VPX PROCESSOR CARD WITH NXP® ARM® LX2160A

Available with DO-254 DAL A artifacts for safety certification

The VPX3-1708 single board computer delivers the next step in performance while maintaining a similar power envelope to previous NXP processor generations. Available in a safety-certifiable variant, the V3-1708, this commercial off-the-shelf (COTS) processor card is designed to reduce the time, cost, and risk associated with getting rugged, safety-critical systems to the field.

  • High-performance, SWaP-optimized processing
  • Enhanced Trusted Computing capabilities
  • Built in adherence to DO-254 and AMC 20-152A/AC 20-152A
  • Failure detection coverage through FMEA and BIT software source kit

The VPX3-1708 and V3-1708 support a wide range of popular operating systems, including DDC-I Deos, Green Hills Software INTEGRITY-178 tuMP, Lynx Software Technologies LynxOS, and Wind River VxWorks HVP.

Take flight faster with the VPX3-1708 and V3-1708:

High-performance, SWaP-optimized processing

The VPX3/V3-1708’s LX2160A system on chip (SoC) processor provides an impressive amount of processing power and I/O complement in a low total power envelope. With the addition of wire rate I/O processing (WRIOP) and other off load engines, the VPX3/V3-1708 provides more real-time processing in the cores for compute-intensive applications.

Enhanced Trusted Computing capabilities

For applications requiring information assurance, the VPX3/V3-1708’s hardware design supports NXP Secure Boot and trust capabilities, along with Arm TrustZone.

Built in adherence to DO-254 and AMC 20-152A/AC 20-152A

The V3-1708 variant is designed for DAL A systems where AMC 20-152A/AC 20-152A is the means of compliance, calling up DO-254 . It’s ideal for safety-critical systems, such as flight control computers, mission control computers, and primary flight displays. Complete your certifiable system with our V3-717 graphics processor and V3-611 I/O module.

Failure detection coverage through FMEA and BIT software source kit

A functional level Failure Modes and Effects Analysis (FMEA) is performed during design to derive additional hardware requirements for safety nets (BITE), identify module-level BIT software, identify system level requirements, and provide a measure of failure mode detection coverage.

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic