XMC-554 2TB NAND SATA Drive
- REQUEST A QUOTE
- Up to 2 TB total capacity
- NAND flash (MLC)
- ECC, wear leveling and bad block management
- Boot drive support
- SMART attributes supported
- Encryption optional (AES-256)
- Windows, Linux, and VxWorks support
- PCI Express (PCIe) 2x Gen2
- Conduction-cooled Level 200
- Low power
- Write protect
- Data recording
- Video recording
- Mission data
- Mission maps
- Data logging
The VPX6-187 VPX Single Board Computer is based on the NXP QorIQ P4040/4080 SOC multi-core processor. Available in versions with 4 or 8 cores running up to 1.5 GHz, and up to 8 GB of high-bandwidth...
Our VPX6-195 6U OpenVPX T2080 Single Board Computer (SBC) combines performance with the advanced I/O capabilities of the NXP's quad-core AltiVec enabled T2080 processor. Designed for...
Using one or two NXP (formerly Freescale) MPC7447A/7448 Power Architecture processors with AltiVec technology, and up to 1 GB of DDR1 SDRAM, the VME-183 Single Board Computer provides an ideal...
The SVME/DMV-184 combines the performance and I/O capabilities of the MPC8640 processor with an extensive I/O complement, resulting in a highly capable processing platform for a wide range of...
The VME-186 VME Single Board Computer is based on NXP's high-performance QorIQ P4080 SOC multi-core processor. With four or eight Power Architecture cores running up to 1.5 GHz, and up to 8 GB of...
The XMC-554 rugged, high performance, reliable and power-efficient NAND flash solid state drive (SSD) solution does not have any moving parts. This provides significantly lower power consumption and an order of magnitude improvement in reliability in environments with vibration and contaminants, compared to traditional rotating hard disk drives (HDD). Also important is the clear performance advantage, due to the lower latency and higher data transfer rates. This translates to enormous benefits in regular operating conditions and more critically, in high-risk combat environments.
The XMC-554 provides two independent mSATA interfaces, one per "drive" providing up to 2 TB of MLC NAND flash. Approximately 20% of the total capacity is reserved for over provisioning. The following table summarizes the bank configurations and available disk space to the application.
Industry standard NAND flash error correcting code (ECC) is supported, as well as wear leveling and bad block management. The wear leveling algorithm spreads the program/erase cycles evenly across the media, including the over provisioning sectors, avoiding premature device failure due to frequent data overwrites on the same data. The XMC-554 tracks the write/erase history of each flash block and will immediately retire blocks if the block fails during an erase or program operation, or if the wear cycle count exceeds the rated cycle count of the flash device.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.