ACR5330 3U VPX Carrier Card
- REQUEST A QUOTE
- 3U OpenVPX Carrier Card for 1 x XMC module
- XMC site supports
- PCI Express Gen 2 and 8 lanes wide
- 3.3V, 5V and +/1 12V via VPX backplane
- I/O Configuration
- Supports front or rear panel XMC I/O
- Rear I/O is compliant to VITA 46.9 X24s+X8d+X12d
- Available in air-cooled and conduction-cooled versions
The ACR5305/CC is a PMC/XMC carrier card manufactured by Acromag and is one of a family of open architecture VPX modules available from Curtiss-Wright. The ACR5305 is intended for use with...
The XMC/PMC-651 is a 12-port Gigabit Ethernet switch packaged in the industry-standard XMC form factor. It is designed to support "in-chassis" networks with managed Layer-2 switching capabilities....
The VPX3-1257 rugged, high performance 3U OpenVPX single board computer (SBC) is based on the Intel 3rd Generation Core i7 (Ivy Bridge) quad-core processor. The VPX3-1257 Intel Single Board...
The XMC-715 is an AMD E4690-based high performance graphics controller XMC designed for rugged deployed military and aerospace graphics sub-systems where high-performance, low power, high...
The ACR5330/CC is an XMC carrier card manufactured by Acromag and is one of a family of open architecture VPX modules available from Curtiss-Wright. The ACR5330/CC is intended for use with Curtiss-Wright XMC-715 graphics card, XMC-651 Ethernet Switch and other mezzanine modules.
These 3U mezzanine carrier cards provide a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector.
The ACR5330/CC can be used as a VPX switch card allowing a host CPU to communicate with up to three downstream cards in addition to the XMC card.
These carriers are ideal for high performance industrial, defense, scientific research, and telephony systems requiring high speed I/O expansion. The ACR5330/CC is available in two versions: air-cooled and conduction-cooled.
Backplane Fabric Ports
The ACR5330/CC connects to other cards via an 8-lane Gen1 or Gen2 PCIe port through the VITA 46.9 P2 connector. All PCIe ports go through a PLX PCIe switch.
OpenVPX Carrier Interface
The ACR5330/CC is compatible with the following VITA 65 module/slot profiles:
The ACR5330/CC is equipped with one mezzanine site capable of supporting an IEEE 1386 XMC module. The XMC site is connected to the PCIe switch through an 8-lane PCIe host interface on the P2 connector. The rear I/O is supported via the P16 and complies with VITA 46.9 X24s+X8d+X12d.xmc
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.