DTS3: 3-slot rugged Network Attached File Server
- REQUEST A QUOTE
- Network Attached Storage (NFS, CIFS, FTP, HTTP)
- Block Storage (iSCSI)
- Ethernet recording and packet capture (PCAP)
- Net booting clients (PXE, DHCP)
- 2-layer encryption (HWFDE + SWFDE)
- Disk Partitioning
- Deployed network-centric systems
- Mobile data loader
- Remote embedded client boot
- Flight test instrumentation
EOL Product Change Notice - CNS2 The Compact Network Storage 2-Slot (CNS2) FIPS 140-2 is a conduction-cooled, rugged, NAS file server designed to be mounted in an ARINC tray on board mobile...
EOL Product Change Notice - CNS2 T1 The Compact Network Storage 2-Slot (CNS2) with Type 1 is a rugged network file server (NFS) that supports industry-standard network storage protocols (NFS,...
The Compact Network Storage 4-slot (CNS4) is a conduction-cooled, high-performance network file server with scalable storage and encryption options. CNS4 is network-agile supporting CIFS, NFS,...
The Data Transport System (DTS1) is a rugged Network Attached Storage (NAS) file server for use in Unmanned Aerial Vehicles (UAV), Unmanned Underwater Vehicles (UUV), and Intelligence...
The Removable Memory Cartridge (RMC) is a direct attached storage device specifically designed for rugged, deployed applications. With a 100,000 insertion cycle connector, the RMC was designed to...
The Data Transport System 3-slot (DTS3) is a rugged Network Attached Storage (NAS) file server for use in mobile vehicles, field ground stations, and aircraft. The DTS3 is easily integrated into network centric systems providing an easy-to-use, turn-key, rugged Network File Server (NFS). The system houses three Removable Memory Cartridges (RMC) that provide quick off load of data. The RMC can be easily removed from one DTS3 and installed into any other DTS3 providing full data transfer seamlessly between one or more networks in separate locations (e.g. ground-vehicle-ground).
Most modern vehicles, aircraft, and systems are built around a network-centric architecture. The backbone of such systems is Gigabit Ethernet (GbE) which operates at 1.25 Gb/s. Ethernet is ubiquitous with extensive industry support including hardware and software.
With a network switch (or redundant switches) in the middle of the system, any network-enabled device can communicate with any other similar device. NAS, like the DTS3, allow any client to retrieve stored data or save newly captured data. A NAS provides size, weight, and power (SWaP) advantages by negating the need for storage in each computer, display, or management device. These network clients can use the DTS3 to store sensor or maintenance data and to retrieve the latest mission and digital map data and can be different operating systems (Linux, VxWorks, Windows, etc) or CPU’s as long as they support industry standard protocols like NFS, CIFS, FTP, or HTTP.
This product is not subject to the USA International Traffic in Arms Regulations (ITAR) controls (US EAR export controls applies).
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.