DTS1: 1-slot Rugged Network Attached File Server
- REQUEST A QUOTE
- Network Attached Storage
- iSCSI Block Storage
- Ethernet recording and packet capture
- PXE boot of network clients
- 2-Layer encryption
- Deployed network-centric systems
- Mobile data loader
- Remote embedded client boot
- Flight test instrumentation
The Compact Network Storage 2-Slot (CNS2) FIPS 140-2 is a conduction-cooled, rugged, NAS file server designed to be mounted in an ARINC tray on board mobile units in harsh environments. With the...
The Compact Network Storage 2-Slot (CNS2) with Type 1 is a rugged network file server (NFS) that supports industry-standard network storage protocols (NFS, CIFS, HTTP, and FTP) through two 1GbE...
The Compact Network Storage 4-slot (CNS4) is a conduction-cooled, high-performance network file server with scalable storage and encryption options. CNS4 is network-agile supporting CIFS, NFS,...
The Data Transport System (DTS3) is a rugged Network Attached Storage (NAS) file server for use in mobile vehicles, field ground stations, and aircraft. The DTS3 is easily integrated into Network...
The Removable Memory Cartridge (RMC) was specifically designed for use in deployed, rugged applications. Based around industry standard 2.5" SATA Solid State Drives (SSD), the RMC is scalable and...
The Data Transport System (DTS1) is a rugged Network Attached Storage (NAS) file server for use in Unmanned Aerial Vehicles (UAV), Unmanned Underwater Vehicles (UUV), and Intelligence Surveillance Reconnaissance (ISR) aircraft. Easily integrated into network centric systems, the DTS1 is an easy to use, turnkey, rugged network File Server that houses one Removable Memory Cartridge (RMC) that provides quick off load of data. The RMC can be easily removed from one DTS1 and installed into any other DTS1 providing full, seamless data transfer between one or more networks in separate locations (e.g. ground => vehicle => ground).
Most modern unmanned vehicles, ISR aircraft and mobile ground vehicles are built around a network-centric architecture. The backbone of such systems is Gigabit Ethernet (GbE) operating at 1.25 Gb with some newer systems committing to higher speeds of 10 GbE.
With a network switch (or redundant switches) in the middle of the system, any network-enabled device can communicate with any other similar device. NAS devices like the DTS1 allow any client to retrieve stored data or save new captured data. A NAS device provides SWaP advantages by negating the need for storage in each computer, display, or management device. These network clients can use the DTS1 to store sensor or maintenance data and to retrieve the latest mission and digital map data. These network devices can be different operating systems (Linux, VxWorks, Windows, etc.) or CPUs as long as they support industry standard protocols like NFS, CIFS, FTP, or HTTP.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.