PRV-0891 Bumper Beans (Silastic Standoff/Spacer) for PC/104 PCBs
Bumper Beans™ are printed circuit board (PCB) shock and vibration isolators designed to cushion motherboards, baseboards and other PCBs that experience mechanical stress in high vibration/shock environments. They serve as replacements for aluminum or nylon standoffs, which are traditionally used to secure a PCB to its enclosure. Embedded computer systems with EBX, ETX, PC/104 or any other form factor of PCB that is mounted directly onto a septum, enclosure, baseplate, or panel could incorporate Bumper Beans to increase reliability and extend component life to reduce harmful shock/vibration energies experienced during portable, vehicular and other demanding applications.
Made of shock-absorbing Silastic® silicone rubber with threaded aluminum nuts/screws incorporated into each end, Bumper Beans are designed to reduce G-force sine waves, particularly in high frequencies. They have a durometer hardness of 59 and measure 0.75" in length and 0.55" in diameter. Bumper Beans also have either 4-40 and/or 6-32 threaded ends in male/female or female/female versions to accommodate different mounting holes and applications.
While Bumper Beans are traditionally placed underneath circuit boards, such as with Parvus' 3x5 PC/104 extrusion or EBX enclosure, Bumper Beans can also be attached under septum-mounted railed card cages (i.e. with 6x7 enclosure) and other packaging components that incorporate mounting holes. Moreover, Railed Card Cages mounted with a 5x5 Aluminum Enclosure can use four of these shock isolators on each end of the card cage to cushion against forward/backward movement that might shift the card cage toward the enclosure’s endcaps.
- REQUEST A QUOTE
|Shock/Vibration Dampening||Reduction in G-force sine waves, particularly in high frequencies|
|Thread||4-40 and/or 6-32 Nut/Screw, Nut/Nut, Screw/Screw|
|Material||Dow Corning Silastic Silicone Rubber|
|Configurations||Available in single units or in set of 12:
4-40 F/F Thread
4-40 M/F Thread
6-32 F/F Thread
6-32 M/F Thread
The PRV-0509 is a PC/104 Fan Card designed to help cool embedded PC/104 systems and remove dangerous hot spots, even in completely enclosed applications. In most cases, it is placed between a CPU...
5-Port PC/104 10/100 Fast Ethernet Switch, Unmanaged The Parvus PRV-1059 is a rugged VLAN-capable 5-port PC/104 Fast Ethernet switch featuring very low power consumption and highly...
PRV-1220 is a low-cost, CompactFlash® to IDE adapter flexibly designed with both 40-pin (0.10") and 44-pin (2mm) IDE connectors. Fully compatible with Type I and Type II cards, the adapter enables...
PC/104-Plus & PCI/104-Express 100W / 50W Isolated DC/DC MIL-STD-1275/704 Power Supplies The PWR-21-11 and PWR-22-11 boards are rugged MIL-STD-1275/704 compliant DC/DC converter cards in...
PC/104 Shock Rocks are designed to isolate and absorb potentially damaging shock and vibration energy experienced by embedded PC/104 electronics in mobile, vehicular and other high shock/vibration...
The Parvus SWI-22-10 is a rugged Commercial Off the Shelf (COTS) Gigabit Ethernet switch card optimized for size, weight and power (SWaP) sensitive embedded military and civilian computer network...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.