MEC-2060 3/4 ATR PC104 Enclosure
3/4 ATR PC/104 Enclosure Rugged Avionics/Military Chassis for ARINC 404A Mounting
The MEC-2060 is designed to meet the demanding requirements of airborne, sea-going, land mobile applications. This light-weight 3/4 ATR enclosure features a rugged, conduction-cooled extruded aluminum chassis designed to fit Aviation Transport Racks (ATRs) commonly used in commercial and military aircraft applications.
Equipped with NEMA-rated end caps that accommodate steel J-hook and bushing mounting (for an ARINC 404A type vibration/shock tray), the aluminum enclosure enables PC/104 embedded systems to be implemented in ATR applications formerly limited to the costly VMEbus architecture. This allows high performance PC-compatible software and Commercial-Off-The-Shelf (COTS) PC/104 hardware to be used in a variety of aviation environments to reduce overall system cost and development time.
Its 0.15" thick extrusion has inner dimensions of 5.0" x 5.0" and standard lengths of 6.0", 8.0, 10.0" and 12.0" to accommodate up to 5, 8, 11, or 14 PC/104 cards mounted within a shock-mounted Railed Card Cage Card Cage. The 12.0" version conforms with the 3/4 ATR Short form factor. The removable ends measure 7.5" in width and have screw hole center at 6.75". Gaskets are also available in rubber or EMI shielded material to enhance the end caps' environmental protection against water and/or electromagnetic interference.
By leveraging Parvus avionics enclosures, aerospace electronics packages can now take advantage of the small, rugged, PC/104 footprint and gain full PC/AT functionality for ARINC 404A applications. Quarter-Turn Dzus Rail Mount Enclosures are also available that adhere to the military mounting specification MS25212 (See MEC-2061).
Semi-custom enclosures and end caps tailored to specific customer requirements (i.e. connector or LCD display holes) can also be accommodated.
- REQUEST A QUOTE
|Compatibility||Fits Standard 3/4 ATR 5" Rack Opening (ARINC 404A Tray); Front endcap has hardened steel J-Hooks; Rear endcap accepts standard ATR dagger pins|
|Capacity||Accepts Up to 10" Railed Card Cage (up to 14 PC/104 Cards)|
|Shock/Vibration Dampening||Shock Mounting Can be Done Via Silastic Shock Rocks|
|Protectio||Provides NEMA 4X water-resisitant protection; Optional Rubber Gaskets or EMI Shielding Available|
|Extrusion Sizes||6061-T5-T6 Aluminum Extrusions 6", 8", 10", 12" Lengths|
|Card Cage Support||Can be used with Removable Aluminum PC/104 Railed Card Cage (to eliminate standoffs/spacers)|
The DuraChassis extruded aluminum PC/104 enclosure is one of the most rugged PC/104 chassis on the market. Made of lightweight, clear-anodized tempered aluminum, this revolutionary enclosure system...
The MEC-2061 PC/104 1/4-Turn, Rail-Mount Enclosure offers a rugged packaging solution for PC/104 systems used in aviation, military and other demanding applications. Delivering NEMA rated...
The MEC-2062 is a rugged aluminum enclosure designed for packaging 5.75" x 8.0" form-factor EBX (Embedded Board, eXpandable) boards or other Single Board Computer (SBC) boards of similar or smaller...
PC/104 Shock Rocks are designed to isolate and absorb potentially damaging shock and vibration energy experienced by embedded PC/104 electronics in mobile, vehicular and other high shock/vibration...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.