


The ACD/CJB/002 is designed to be used with the KAD/TDC/107 and is used to terminate up to 12 thermocouples at a measured temperature.
Features
- Supports 12 thermocouples
- Three built-in PT100 sensors (typical accuracy of ±0.1°C)
Applications
- Use to connect thermocouples to KAD/TDC/107 modules
ACD/CJB/002 Cold junction block for KAD/TDC/107 - 12 channels
The ACD/CJB/002 is designed to be used with the KAD/TDC/107 and is used to terminate up to 12 thermocouples at a measured temperature. The block comprises a CON/KAD/010 and an ACD/BAC/005 and is delivered with every KAD/TDC/107. The ACD/BAC/005 is an electroless, nickel-plated, aluminum backshell for use with CON/KAD/010 mating connectors. It provides heavy thermal mass and increases thermal isolation of the area around the thermocouple cold junction and built-in temperature sensors. The CON/KAD/010 has three built-in PT100 temperature sensors for accurate measurement of thermocouple cold junction temperature, as close as possible to the real junction. The sensors used are 1/3 of class B, DIN/IEC 60751 specification (±0.1 ± 0.00166×t) [°C]. In a typical operational range of -40 to +85°C these sensors are more accurate than ±0.24°C, with typical accuracy being around 0.1°C.
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.