The KAM/CHS/02F is a compact two user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply unit.
Features
- Power supply unit and two user-slots
- 18 to 40 VDC isolated power supply
- Rugged aluminum housing
- 8 MHz x 16-bit digital backplane
- Special mounting orientation
- Operates as master or slave in a distributed system
Applications
- Flight test instrumentation systems for limited spaces
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate over copper wiring, supporting straight-through or cross-over cables.
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs.
KAD/ADC/136 is used to condition & digitize up to 8 analog channels.
The KAD/MAT/101 allows you to run your own programs based on a dual-core C6000DSP+ARM9 microcontroller. It provides high-performance DSP functions.
DAS Studio 3 software allows you to configure DAUs, network switches, recorders & ground stations in an integrated environment.
The KAM/CHS/03Uis a compact three-user-slot Acra KAM-500 chassis that includes a power supply module that regulates power supplies to the backplane.
The KAM/CHS/04L is a compact four user-slot KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit.
KAM/CHS/05F is a compact, five-user-slot KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/013/SC power supply unit.
The KAM/CHS/06U is a six-user-slot KAM-500 chassis that includes a power supply module that regulates power supplies for the backplane.
The KAM/CHS/09U is a nine-user-slot KAM-500 chassis that includes a power supply module that regulates power supplies for the backplane.
The KAM/CHS/12R is a twelve user-slot KAM-500 chassis that includes a power supply module that regulates power supplies for the backplane.
The KAM/CHS/13U is a thirteen user-slot Acra KAM-500 chassis that includes a power supply module that regulates power supplies for the backplane.
KAM/CHS/02F Acra KAM-500 Chassis - 2 User-Slots
The KAM/CHS/02F is a compact two user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply unit.
The backplane has two slots for user-modules, which are polarized to prevent the insertion of the backplane controller module. The backplane has power supply lines and the standard 16-bit address/data bus with read/write control lines. The only ICs on the backplane are demultiplexers for user-module select.
This chassis has been specially designed for space-limited applications. As such, those modules which require excitation from ±7V are not suitable as the power supply does not supply these voltage levels.
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.
Reliable and flexible data capture is key to fight test and monitoring
Modern aerospace instrumentation systems can be highly complex, with changing requirements that can cause significant delays. Reliably capturing data is essential to avoid expensive additional flights or the loss of months of program data. Curtiss-Wright provides a comprehensive range of cutting-edge COTS and customizable systems that have been engineered to meet these challenges. When you use our systems, you automatically get an expert partner with decades of experience that can extend your system architect/design team to deliver a future-proof total system solution.