The KAD/DSI/104 monitors the status (high/low) of up to 24 differential-ended optically isolated input channels.
- 24 differential ended optically isolated bi-level input channels
- 24 x 32-bit counters, each counter can be programmed to operate in one of 10 different modes
- 40 ns internal resolution
- First In First Out (FIFO) based time tagging
- Resettable counters
- Independent channel programmability of falling/rising edge detection
- Detection of 0.5 μs wide input signal pulses
- Engine speed measurement
- Frequency, period, pulse width, duty cycle measurements
- Data capture from a parallel bus
- Time stamping of events
KAD/DSI/104 24 Channels Digital Module
The KAD/DSI/104 monitors the status (high/low) of up to 24 differential-ended optically isolated input channels. Each of these has an assigned programmable 32-bit counter. Additionally, each of the channels can be used to trigger time-tagged events.
Each counter can be programmed to operate in one of the following modes: Period, Pulse Width, Duty Cycle, Frequency, Events Since Sample, Events Since Power Up, Events Since Reset, Time Since Event, Samples Since Power Up, or Samples Since Reset. The range of each counter is programmable as is the sensitivity to the rising/falling edge. If the counter uses more than 16 bits, they are treated as two words.
All channels control time tagging to the 1K word deep FIFO (80 bits wide each word). For each input, time tagging can be triggered by a rising edge, falling edge, both edges or neither (when the channel is disabled). Every time a trigger occurs, a 80-bit word is written to the FIFO consisting of the 24 inputs (configurable to be either input state after the change or the value representing the bits which triggered the event), the 48-bit binary coded decimal IRIG time that the event happened, and FIFO flags (empty and skipped).
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.