KAM/CHS/03U Acra KAM-500 chassis with 3 user-slots and mounting holes located along side of chassis
- REQUEST A QUOTE
- Power supply unit and three user-slots
- 18 to 40 VDC isolated power supply
- Rugged aluminum housing
- 8 MHz x 16-bit digital backplane
- Operates as master or slave in distributed system
- LED power-on indicator
- Flight test instrumentation systems for limited spaces
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
New Wireless Data Acquisition Evaluation Kit - Introductory Offer Contact us for details. The Wireless Data Acquisition evaluation kit is an all-in-one solution to get started with wireless...
The KAM/CHS/03U/LSM is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies to the backplane (isolated 28V nominal in).
LSM in this data sheet refers to Long Side Mounting. The backplane has three connectors for user-modules, which are polarized to prevent the insertion of the backplane controller module. The backplane distributes power and connects address, data and control lines to the user-modules. The only ICs on the backplane are demultiplexers for user-module select signal. Any user-module can be placed in any user-slot in any combination. 2.0A is available for bridge excitation.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.