KAD/ADC/109/S1 Full-Bridge ADC

Download Data Sheet
  • Overview
  • Specifications
  • Downloads
  • Featured Products
  • Request a Quote
  • Product Support

The KAD/ADC/109/S1 provides independent excitation for up to eight channels. Each channel has a separate programmable amplifier, programmable filter, and A/D converter.

At the heart of the KAD/ADC/109/S1 is a hard-wired state-machine that over-samples all channels at a rate between 96 ksps and 192 ksps and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band, decimate by two, fifteen tap, finite-impulse-response (FIR) filters with 32-bit coefficients followed by an 8th order Butterworth IIR filter with a default cutoff point set at a quarter of the sampling frequency. 

All signals are sampled simultaneously. Thus, when several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels will be aligned.

Features

  • Eight full or ½-bridge, potentiometer or differential-ended (D/E) input channels
  • Programmable input range (±10mV to ±10V)
  • High accuracy (max. 0.08% FSR at unity gain)
  • Programmable voltage excitation and balance adjust
  • High impedance (>10MΩ) when on/off
  • Short on any channel does not affect others
  • 16-bit simultaneous sampling on each channel
  • Up to 24K samples per second per channel
  • Up to 6kHz Bandwidth (AAAF filter)

Applications

  • Analog signal
  • Acquisition Differnetial Ended
  • Full Bridge
  • Half Bridge
  • Potentiometer
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

KAD/ADC/109/S1 Full-Bridge ADC

Download Data Sheet