KAD/ADC/109/S2 8 Channel Full-Bridge ADC

Download Data Sheet
  • Overview
  • Specifications
  • Downloads
  • Featured Products
  • Request a Quote
  • Product Support

The KAD/ADC/109/S2 has eight channels of signal conditioning and data acquisition for differential voltages, strain gage, or bridge measurements. In addition to the measurement channel, the KAD/ADC/109/S2 provides independent bipolar excitation for up to eight channels.

Each differential-ended signal has a separate programmable amplifier, filter, and A/D converter. At the heart of the KAD/ADC/109/S2 is a hard-wired state-machine that over-samples all channels at a rate between 96 ksps and 192 ksps and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band, decimate by two, 15 tap, Finite-Impulse-Response (FIR) filters with 32-bit coefficients followed by an 8thth order Butterworth Infinite-Impulse-Response (IIR) filter with a default cutoff point set at a quarter of the sampling frequency.

All signals are sampled simultaneously. Thus, when several channels are sampled at different sampling rates, all channels are aligned at the start of an acquisition cycle.

The KAD/ADC/109/S2 is intended for use with strain gauges, and should not be used for asymmetric bridge transducers such as accelerometers, pressure transducers unless sensor re-calibration is carried out on a channel-by-channel basis. If the sense lines or internal offset adjust (balance feature) are not required, refer to the KAD/ADC/109/S1.

Features

  • Eight full or ½-bridge, potentiometer or differential ended input channels
  • Programmable input range (±10mV to ±10V)
  • High accuracy (max. 0.08% FSR at unity gain)
  • Programmable voltage excitation and balance adjust
  • High impedance (>10MΩ) when on/off
  • Short on any channel does not affect others
  • 16-bit simultaneous sampling on each channel
  • Up to 24k samples per second per channel
  • Up to 6 kHz Bandwidth (AAAF filter)

Applications

  • Analog signal
  • Acquisition Differential Ended
  • Full Bridge
  • Half Bridge
  • Potentiometer
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

KAD/ADC/109/S2 8 Channel Full-Bridge ADC

Download Data Sheet