KAD/TDC/102 15 channel Thermocouple ADC
- REQUEST A QUOTE
- 15 cold junction thermocouple (T/C) input channels
- Supports Type K, B, C, E, J, N, R, S, T Thermocouples, and Others
- High Accuracy (±0.5°C typical)
- Junction block temperature measurement
- Programmable T/C type (per module)
- Digital reference junction compensation
- 8th order Butterworth filter with programmable cutoff frequency per channel
- Supports grounded and isolated T/Cs
- External, third party cold junction blocks with PT100
- sensors can be used if required
- Up to 250Hz bandwidth
- Up to 1k samples per second (sps) per channel
- Temperature measurements with thermocouples
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
15 channel, thermocouple ADC with reference compensation (250Hz b/w) - 15ch at 1000Hz
The KAD/TDC/102 is used to condition and digitize up to fifteen thermocouple channels and three channels of module junction temperature. Each thermocouple channel can be configured separately for use with a wide range of thermocouple types.
Together, the KAD/TDC/102 and the CON/KAD/010 connector use the preconfigured module junction temperature channels 0 and 2, to perform linearization and cold junction compensation for each thermocouple channel. At the heart of the KAD/TDC/102 is a hard-wired state-machine that oversamples all channels at a rate up to 50 ksps and digitally filters any noise above the user-programmable cutoff frequency.
This is achieved using cascaded, half-band, Finite-Impulse-Response (FIR) filters followed by an 8th order Butterworth Infinite-Impulse-Response (IIR) filter with a default cutoff point set at one quarter of the sampling frequency (fc = fs/4). All signals are sampled simultaneously. When several channels are sampled at different sampling rates, at the start of an acquisition cycle, all channels are aligned.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.