KAD/MSB/103 1 channel Dual Redundant Bus Monitor
- Downloads
- SPECIFICATIONS
- SUPPORT
- REQUEST A QUOTE
Product Downloads
Featured Downloads
Features
- Monitors 1 dual redundant MIL-STD-1553 bus using Direct or Transformer coupled operation
- Coherently parses traffic and tags for up to 1024 messages
- 3K word deep selective FIFO for traffic and tags (snarfer) formatted with IRIG-106 Ch.8
- Handles all mode codes (including user defined)
- Protocol tracker does not rely on instrumentation bit
- ID based on all 16 bits of command
Applications
- MIL-STD-1553 traffic monitor
KAM/CHS/13U Acra KAM-500 chassis - 13 Slots
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
NET/SWI/101 Gigabit Ethernet Switch
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
KAD/DSI/102 24 channel Digital Module
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
KAD/VID/106 H.264 Video Encoder
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
KAD/MAT/101 Microcontroller-based module
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
KAD/ADC/136 8 channel Flexible ADC
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
KAD/ADC/135 12 channel Full/½-bridge ADC
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
KAM/CHS/04L Acra KAM-500 chassis, narrow form - 4 user-slots
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
KAM/CHS/03F Acra KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
NET/REC/001 Ethernet Network Recorder (CompactFlash)
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
1 channel, Dual redundant MIL-STD-1553 bus monitor with Parser and Snarfer
The KAD/MSB/103 is a MIL-STD-1553 dual redundant bus monitor which combines the capabilities of a SNARFER, coherent message PARSER, message counter, and error detection functions on a single module. Traffic refers to words on the bus (command, status and data) and tags refer to associated information (microsecond time of sync. bit transition, message count, response time and errors).
When used in PARSER mode, the KAD/MSB/103 triple buffers up to 1,023 complete messages and their associated tags in buffers up to 43 words wide. The INFO tag associated with each message has a stale bit (message read before), a skipped bit (buffer overwritten) and an empty bit (message was never received), as well as an indication on which bus the message was received. The MESSAGE count increments on receipt of a valid message. The ERROR word has bits indicating the type of error caught in the form of a 6-bit code and the bus on which it occurred. The KAD/MSB/103 records Mode Code 17, sub-address map numbers for each remote terminal separately. With that it can monitor the full expanded sub-address space for up to 31 remote terminals. The SNARFER stores selected traffic and tags in a FIFO 3K words deep.
Each word has 16 bits for traffic/tag information and 8 bits for FIFO content identification. Data selection and content identification is based on the bus (primary/secondary), traffic type (command, status, data), tag type (high/low/micro/response time, message count) and how full the FIFO is.
Download Product Sheet register now
Product Finder
CONTACT SALES
Contact our sales team today to learn more about our products and services.
GET SUPPORT
Our support team can help answer your questions - contact us today.