KAD/UAR/102 4 Channel Universal Asynchronous Parser

Download Data Sheet
  • Overview
  • Specifications
  • Downloads
  • Featured Products
  • Request a Quote
  • Product Support

The KAD/UAR/102 is used to parse (coherently extract specific bytes) and snarf (send all data to a FIFO) up to four RS-232/422/485 channels. The module is able to parse and snarf each channel at the same time.  

The signal type (RS-232/422/485), bits per word and parity are programmable on a channel-by-channel basis. The bit rates must be binary multiples of each other. 

In the parser, a total of up to 126 complete messages are triple buffered so that the stale indication is message-wide. Each message can be up to 512 characters (bytes) long (including start and stop characters). Each message is tagged to 0.1 ms resolution; a message is considered found when up to eight specific bytes are received.

The end of the message byte is determined by a user-defined stop character or a specific number of words. A message is not updated if any sequence is incorrect.

The snarfer stores all data from each bus in a separate FIFO 2K words deep.

Features

  • Monitors up to four RS-422/485/232 busses
  • Coherently parses traffic and tags for up to 125 messages from 4 to 512 bytes
  • 2K words deep per channel (snarfer)
  • Bit-rates from 300bps to 1,000,000 bps
  • 7/8 bits per word with odd, even, or no parity
  • Programmable start sequence (1 to 8 bytes), stop sequence (1 byte or by fixed length), and idle time

Applications

  • Receiving data from GPS module or onboard computer
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

KAD/UAR/102 4 Channel Universal Asynchronous Parser

Download Data Sheet