KAM/TCG/106 Time-Code Generator
- REQUEST A QUOTE
- Synchronizes with IRIG-B or GPS
- 1 μs time resolution
- Less than three parts per million drift when acting as a generator
- Time is maintained by using an external battery during power-off; only 3V batteries (±0.5V) supported
- GPS navigation information is available
- Secondary time source input
- System synchronization
- Parameter time tagging
- Global positioning
The KAM/TCG/102 can accept time from an IRIG-B time source, from its onboard GPS receiver (external antenna required), or from an external GPS receiver outputting NMEA messages and a one-PPS...
The KAM/TCG/103 accepts time from three sources: a digital IRIG-B stream (RS-422 or TTL), its own onboard GPS receiver, or from ARINC-429 time labels (octal labels 260 and 150). It can be...
The KAM/TCG/105 can accept time from an IRIG-B time source, from its onboard GPS receiver (external antenna required), or from an external GPS receiver outputting NMEA messages and a one PPS...
The AXN/BCU/401 is a dual-port full-duplex, Gigabit Ethernet, Axon backplane controller, programmer and transmitter. It has a number of features including: In-built switch core...
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
IADS-RTSTATION is a complete real-time and post-test display and analysis software suite and is scalable from a laptop to a large workgroup through its client/server software architecture....
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
The KAM/TCG/106 can accept time from an IRIG-B time source, from its onboard GPS receiver (external antenna required), or from an external GPS receiver outputting NMEA messages and a one PPS signal. The received time is written to an internal timer and to a Real-Time Clock (RTC) that maintains time during power-down (when an external battery is connected). The time can be used for synchronization of a distributed Acra KAM-500 data acquisition system. The module generates IRIG-B outputs to allow external devices to synchronize with the Acra KAM-500 system.
The module comprises a GPS reader and an IRIG reader which decode incoming signals. The IRIG reader extracts control functions and straight binary seconds as well as time. The GPS reader parses NMEA messages as they are generated by the receiver. Extracted navigation data such as position, altitude, velocity, and heading are available as individual parameters. The module can also be synchronized via NMEA messages being sent over RS-232 from a third party GPS or PC with granularity of one second.
The timer block is a 4 x 16-bit Binary Coded Decimal (BCD) counter with microsecond resolution. For example, at 1 μs before midnight on January 1, the timer would read 0001 23:59 59.99 9999.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.