KAD/ETH/101 Ethernet Transmission and Programming Module
- REQUEST A QUOTE
- Bi-directional, full-duplex, fast Ethernet (100BaseTx) connection
- Fixed user-assigned Internet Protocol (IP) address
- Two separately buffered Ethernet outputs
- UDP support for packets up to 64kbyte (32ksamples) via IP fragmentation
- Current Value Table (CVT) of up to 1Msample
- IP version 4 (IPv4) and IENA protocols supported
- Ethernet based data acquisition systems
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/BCU/101 functions as two modules in one; an encoder and a backplane controller. The encoder is functionally identical to the KAD/ENC/005 and encodes data from any Acra KAM-500 module in an...
The KAD/ETH/102 is a full-duplex, Fast Ethernet (100 Mbps) module that can be used to program an Acra KAM-500 system or transmit data from an Acra KAM-500 system. In acquisition mode, some or all...
The KAD/SWI/108 is an Ethernet switch designed for operating in harsh environments. The KAD/SWI/108 has a store-and-forward Xbar switching fabric that is configured via a static forwarding table...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
Ethernet transmission and programming interface module (IENA compatible)
The KAD/ETH/101 is a full-duplex, fast Ethernet (100 Mbps) module that can be used to program an Acra KAM-500 system or transmit data from an Acra KAM-500 system. In acquisition mode, some or all acquired data is transferred from the backplane to the onboard CVT. Onboard it is packetized into a user-defined structure. Once full, the packet is transmitted via UDP.
Any number of user-defined packet structures can be handled simultaneously. Different packet identifiers, packet sizes and destination IP addresses can be individually programmed for each packet type. Destination IP addresses can be unicast, multicast or broadcast. Upon reception of a programming packet, the module immediately exits acquisition mode and switches to program/verify mode. In program/verify mode it can read or write data blocks to or from any module in any chassis within a distributed Acra KAM-500 system. The KAD/ETH/101 supports IPv4 networks with fixed IP address allocation, including user-assignment of the module's own IP address. The module is factory-programmed with a unique Ethernet MAC address.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.