The KAD/MEM/004 is a memory module that supports the logging of Acra KAM-500 data to solid-state memory. The data can be sourced from any module within a distributed KAM-500 system. Logged data can then be extracted via a Fast Ethernet interface.
Key Features
- Supports logging of data into solid-state memory
- High data transfer rate
- Data extraction via Fast Ethernet (100BaseTX)
- Programmable event sizes and data triggers
Applications
- Stand-alone data logging
- Restricted unit access
DAS Studio 3 software allows you to configure DAUs, network switches, recorders & ground stations in an integrated environment.
The KAD/ADC/109/S1 provides independent excitation for up to eight channels. Each channel has a separate programmable amplifier.
The KAD/ADC/109/S2 has eight channels of signal conditioning and data acquisition for differential voltages, strain gage, or bridge measurements.
KAD/MEM/004 CompactFlash Memory Module
The KAD/MEM/004 is a memory module that supports the logging of Acra KAM-500 data to solid-state memory. The data can be sourced from any module within a distributed Acra KAM-500 system. Logged data can then be extracted via a Fast Ethernet interface.
The KAD/MEM/004 is designed for applications where stand-alone logging of data is required, without the need for a separate data recorder, and where access to the unit is restricted. If removal of the CompactFlash card is preferred, the KAM/MEM/103 is recommended.
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.