KAD/ETH/102 Ethernet Transmission and Programming Module

flight test and monitoring family header
KAD/ETH/102 Ethernet Transmission and Programming Module
Product Sheet
Product Sheet

Ethernet transmission and programming interface module (iNET-X compatible) features programming and verification of up to 64 Acra KAM-500 chassis.
 

Features

  • Programming and verification of up to 64 Acra KAM-500 chassis
  • Bi-directional, full-duplex, Fast Ethernet (100BaseTX) connection
  • Fixed user-assigned Internet Protocol (IP) address
  • Two separately buffered Ethernet outputs
  • User Datagram Protocol (UDP) support for packets up to 64kbyte (32ksamples) via IP fragmentation
  • Current Value Table (CVT) of up to 1Msample
  • IP version 4 (IPv4) and iNET-X protocols supported
  • Replies to Address Resolution Protocol (ARP) and Packet INternet Groper (PING) requests from other nodes on the network

Applications

  • Ethernet-based data acquisition systems
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

KAD/ETH/102 Ethernet Transmission and Programming Module

The KAD/ETH/102 is a full-duplex, Fast Ethernet (100 Mbps) module that can be used to program an Acra KAM-500 system or transmit data from an Acra KAM-500 system. In acquisition mode, some or all acquired data is transferred from the backplane to the onboard CVT. Onboard it is packetized into a user-defined structure. Once full, the packet is transmitted via UDP.

Any number of user-defined packet structures can be handled simultaneously. Different packet identifiers, packet sizes, and destination IP addresses can be individually programmed for each packet type. Destination IP addresses can be unicast, multicast, or broadcast. Upon reception of a programming packet, the module immediately exits acquisition mode and switches to program/verify mode. In program/verify mode it can read or write data blocks to or from any module in any chassis within a distributed Acra KAM-500 system. The KAD/ETH/102 supports IPv4 networks with fixed IP address allocation, including user-assignment of the module's own IP address. The module is factory-programmed with a unique Ethernet MAC address.

 

Aerospace Instrumentation Brochure

Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions. 

Learn More