Curtiss-Wright Defense Solutions

AXN/ADC/405 - Differential ended ADC (5 kHz b/w) - 24 analog channels

Downloads
SPECIFICATIONS
RELATED PRODUCTS
SUPPORT
REQUEST A QUOTE

Product Downloads

AXN/ADC/405 ADC 3-Phase Power Monitor Module Product Sheet

Featured Downloads

Features

24 differential ended input channels
Ordering input range from ±100 mV to ±40V
High accuracy (0.01% FSR typical)
High input resistance (>1 MΩ) when on/off for /100M, /1V, and /10V variants
16-bit simultaneous sampling with three configurable output streams on each channel
User defined linearization and compensation for errors in the entire measurement chain

Applications

Differential voltage measurement

AXN/ADC/401 - Flexible ADC Module - 8 analog channels

The AXN/ADC/401 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential ended or single ended voltage measurement, AC coupled single...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

AXN/CHS/16U - Axon chassis, 16 user-slots

The AXN/CHS/16U is a 16 user-slot Axon chassis, which along with the housing and backplane, includes an isolated 100W power supply for the controller and user-modules. A wide input operating...

AXN/ADC/408 - ADC 3-Phase Power Monitor Module - 6 analog channels

The AXN/ADC/408 is a monitor for 3-phase power lines that supports variable frequency power monitoring. It measures parameters associated with 3-phase power lines as follows: 13 steady state...

CONTACT SALES/SUPPORT

The AXN/ADC/405 is used to condition and digitize up to 24 analog differential ended channels. Single ended configurations are possible by enabling programmable pull-down resistors on any of the negative inputs.

At the heart of the AXN/ADC/405 is a hard-wired state-machine that oversamples all channels at a rate between 40 ksps and 80 ksps and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, 15-tap FIR filters with output rate decimation, followed by a final FIR or IIR filter. If IIR filtering mode is selected, the last digital filter in the filtering chain is an 8th or 16th order (selectable) Butterworth filter. If FIR mode is selected, the last digital filter in the filtering chain is a 49-tap Kaiser window, Beta 6 filter.

There are three independently configurable output streams per channel, allowing different sample rate, cutoff, and filter type to be selected for each output stream.

All signals are sampled simultaneously. When several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels are aligned.

Download Product Sheet register now Request Quote