AXN/ADC/401 - Flexible ADC Module
The AXN/ADC/401 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential ended or single ended voltage measurement, AC coupled single ended voltage, ICP sensor, RTD sensor, thermocouple, full-bridge, half-bridge, or potentiometer mode.
For each thermocouple channel, it is necessary to select the Junction Compensation Channel setting. Internally, the AXN/ADC/401 performs linearization for RTD and thermocouple modes.
At the heart of the AXN/ADC/401 is a hard-wired state-machine that oversamples all channels at a rate between 100ksps and 200ksps and digitally filters any noise above the user-programmable cutoff frequency.
This is achieved using cascaded, half-band FIR filters. If IIR filtering mode is selected, the last digital filter in the filtering chain is an 8th order Butterworth IIR filter. There are two independently configurable output streams per channel, allowing different sample rate, cutoff, and filter type to be selected for each output stream. All signals are sampled simultaneously. When several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels are aligned.
- REQUEST A QUOTE
- Eight flexible input channels
- Programmable input range (±40mV to ±10V)
- High accuracy (0.02% FSR typical)
- Flight test instrumentation systems for limited spaces
The AXN/ITE/01U allows Axon user modules to be housed remotely from the Axon chassis. The AXN/ITE/01U can house one Axon user module. Axon user modules placed in the AXN/ITE/01U physically...
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The AXN/BCU/401 is a dual-port full-duplex, Gigabit Ethernet, Axon backplane controller packet programmer and an IPv4/IPv6 data packets transmitter. The Axon backplane controller supports...
The AXN/CHS/16U is a 16 user-slot Axon chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane (isolated 28V nominal...
The AXN/EXT/401 is an extender card, which allows modules contained in an Axonite (AXN/ITE/01U) remote housing to connect to an Axon chassis. Axonites allow modules to be separated from the...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.