AXN/BCU/401 - Axon backplane controller
The AXN/BCU/401 is a dual-port full-duplex, Gigabit Ethernet, Axon backplane controller packet programmer and an IPv4/IPv6 data packets transmitter.
The Axon backplane controller supports chassis programming via Ethernet using Trivial File Transfer Protocol (TFTP). Synchronization with an external PTP Grandmaster is achieved using IEEE Std.1588-2004 (PTPv1) or IEEE Std. 1588-2008 (PTPv2). The AXN/BCU/401 can also act as a PTPv1 or PTPv2 Grandmaster.
In acquisition mode, some or all acquired data is transferred from the backplane to the CVT. Onboard, it is packetized into either an IENA, iNET, iNET-X, or IRIG 106 Chapter 10 UDP application layer packet. Assembled packets can be transmitted simultaneously on either or both Ethernet outputs. For asynchronous bus data, the AXN/BCU/401 supports aperiodic transmission for efficient bandwidth use, whereby a packet is not generated if no fresh data has been acquired from a packetizer user-module.
Incoming traffic on one Ethernet port can be output on the other Ethernet port via an inbuilt switch core, which supports PTPv1 and PTPv2 transparency. This traffic is merged with traffic generated from the chassis. The AXN/BCU/401 has an inbuilt HTTP server, which allows for onboard setup and pre-flight display of key parameters.
- REQUEST A QUOTE
- Dual-port bi-directional, full-duplex, Gigabit Ethernet connection with auto-sensing
- Supports daisy chaining of Axon chassis
- IENA, iNET-X, iNET, and IRIG 106 Chapter 10 UDP-compatible packetization structures
- Synchronization using PTPv1 or PTPv2, or acts as PTPv1 or PTPv2 Grandmaster
- Programming and verification of Axon chassis using TFTP
- In system programmability of firmware and FPGA
- Flight test instrumentation systems for limited spaces
The AXN/ITE/01U allows Axon user modules to be housed remotely from the Axon chassis. The AXN/ITE/01U can house one Axon user module. Axon user modules placed in the AXN/ITE/01U physically...
DAS Studio 3 software allows you to configure DAUs, network switches, recorders and ground stations in an integrated environment. The software is optimized for multi-core platforms with a...
The AXN/CHS/16U is a 16 user-slot Axon chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane (isolated 28V nominal...
The AXN/EXT/401 is an extender card, which allows modules contained in an Axonite (AXN/ITE/01U) remote housing to connect to an Axon chassis. Axonites allow modules to be separated from the...
The AXN/ADC/401 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential ended or single ended voltage measurement, AC coupled single...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.