KAD/ADC/008 Single-ended ADC (programmable analog gain, three phase power monitor, 1 kHz b/w) - 6 channels at 20 sps

The KAD/ADC/008 is a monitor for 3-phase power lines. It measures 40 parameters associated with 3-phase power lines as follows:

  • maximum, minimum, amplitude, root-mean-square and average (5x6 = 30 parameters)
  • active, apparent power and their ratio (3x3 = 9 parameters)
  • period of the VOLTAGE(0) = 1 parameter

The KAD/ADC/008 has a programmable gain amplifier and analog-to-digital converter and a 16,384-point conversion table for each of the six channels. All six channels are sampled simultaneously at 125 ksps.The algorithm waits for a positive-going-zero crossing on channel 0 and resets the maximum/minimum registers for each channel and the accumulators for the various averages. The algorithm ends on a positive-going-zero-crossing after at least 50 ms. The processing algorithm is a hard-wired state machine with no micro-code or forbidden states.

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • Three voltage and three current single-ended (S/E) input channels
  • 10 to 1000 Hz input range
  • ±10V, ±1V input range
  • 12-bit or better resolution on all 40 parameters
  • Accuracy: 0.3% total error from all sources at gain = 1
  • Measures voltage, current and power (active and apparent) RMS
  • Measures period, power-factor and total-power
  • Measures maximum, minimum, amplitude and average for each channel

Applications

  • Three-phase power monitoring
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/ADC/135 Full/½-bridge ADC (voltage/current excitation, programmable analog gain, FIR/IIR, 6.25 kHz b/w) - 12 channels at 25 ksps

KAD/ADC/135 Full/½-bridge ADC (voltage/current excitation, programmable analog gain, FIR/IIR, 6.25 kHz b/w) - 12 channels at 25 ksps

The KAD/ADC/135 is used to condition and digitize up to 12 differential-ended analog channels. At the heart of the KAD/ADC/135 is a hard-wired state-machine that oversamples all channels at a rate...

KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps

KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps

The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...

KAD/DSI/102 Discrete input (programmable counters, time tagging) - 24 channel

KAD/DSI/102 Discrete input (programmable counters, time tagging) - 24 channel

The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...

KAD/MAT/101 Microcontroller-based module

KAD/MAT/101 Microcontroller-based module

The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...

KAM/CHS/03F Acra KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots

KAM/CHS/03F Acra KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots

The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit.   The backplane has three slots for...

KAM/CHS/04L Acra KAM-500 chassis, narrow form - 4 user-slots

KAM/CHS/04L Acra KAM-500 chassis, narrow form - 4 user-slots

The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit.   The backplane has four slots for...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.   The NET/REC/001 can be configured via...

NET/SWI/101

NET/SWI/101

8-port Ethernet switch (Xbar, SNMP, IEEE 1588 V1/V2 Grandmaster) The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is...

CONTACT SALES/SUPPORT


Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic