KAD/CDI/101 Interface module for the cockpit display unit (OBE/CDU/001)

The KAD/CDI/101 controls recording on a KAM/MEM/103 or KAD/MEM/004 module. The KAD/CDI/101 is the Acra KAM-500 interface for the OBE/CDU/001 and supplies power to the OBE/CDU/001. When the event switch on the OBE/CDU/001 is toggled from off to on, the KAD/CDI/101 triggers the Acra KAM-500 to log data on a KAM/MEM/103 or a KAD/MEM/004 module.

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • Remote control of KAM/MEM/103 and KAD/MEM/004 event logging

Applications

  • Data acquisition control
KAM/MEM/103 CompactFlash memory module

KAM/MEM/103 CompactFlash memory module

The KAM/MEM/103 is a memory card interface which supports logging to CompactFlash removable memory cards. The KAM/MEM/103 is designed to be used with a wide range of CompactFlash cards. As higher...

KAD/MEM/004 CompactFlash memory module (data extraction via Fast Ethernet)

KAD/MEM/004 CompactFlash memory module (data extraction via Fast Ethernet)

The KAD/MEM/004 is a memory module which supports logging of Acra KAM-500 data to solid-state memory. The data can be sourced from any module within a distributed Acra KAM-500 system. Logged data...

KAM/CHS/13U Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 user-slots (extended temperature)

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.   The NET/REC/001 can be configured via...

NET/SWI/101

NET/SWI/101 - Gigabit Ethernet Switch

The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...

KAD/MAT/101 Microcontroller-based module

KAD/MAT/101 Microcontroller-based module

The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...

KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps

KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps

The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...

CONTACT SALES/SUPPORT


Products

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic