KAD/DAC/001 8-channel Digital Module

8 channel analog outputs with 16-channel discrete outputs

The KAD/DAC/001 can be used to output up to eight single-ended waveforms, and provide up to 16 discrete output indications.

The module is able to take any parameter from the backplane and, using a user-defined lookup table, map that parameter to the output voltage range of the analog output channel. A different map can be used for each of the eight analog channels.

Each of the discrete outputs can be set to a logic high or low based on a combination of input words. The input words are passed through a user-defined mapping function, which produces a single bit output. A typical example would be a max-min. window function to determine if a parameter lies in a defined range.

The outputs from the mapping functions can be either logically ANDed or ORed together, and inverted if required, in order to control the discrete output.

  • Downloads


  • Eight single-ended (S/E) analog output channels (±10V)
  • 0.25% (FSR) total error from all sources for analog output
  • Lookup tables to map input parameter to analog output
  • 16 S/E discrete output channel (Buffered TTL)
  • Combinatorial logic can be used to map multiple parameters to a single discrete output
  • Outputs are short-circuit protected (indefinite to ground)


  • Output a voltage waveform based on backplane parameters, for example for a strip recorder
  • Provide discrete outputs based on backplane parameters, for example memory status
NET/REC/001 Ethernet Network Recorder (CompactFlash)

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.   The NET/REC/001 can be configured via...

NET/SWI/101 Ethernet Switch

NET/SWI/101 - Gigabit Ethernet Switch

The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...

Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 Slots

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/DSI/102 Discrete input (programmable counters, time tagging) - 24 channel

KAD/DSI/102 24 channel Digital Module

The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

KAD/VID/106 H.264 Video Encoder

The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...

KAD/MAT/101 Microcontroller-based module

KAD/MAT/101 Microcontroller-based module

The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...

12 channel ADC

KAD/ADC/135 12 channel Full/½-bridge ADC

The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...

KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps

KAD/ADC/136 8 channel Flexible ADC

The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...


Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright


Contact our sales team today to learn more about our products and services.





Our support team can help answer your questions - contact us today.