KAD/EBM/102 Gigabit Ethernet bus monitor parser - 1 channel

The KAD/EBM/102 can operate on 10BASE-T, 100BASE-TX and Gigabit Ethernet (1000BASE-T) links and parse Ethernet frames. This allows the data within the parsed Ethernet frames to be distributed to other KAM-500 modules. The KAD/EBM/102 can classify traffic using 8 x 16-bit frame fields such as MAC addresses, IP addresses, IP length, protocol type (UDP/TCP), UDP or TCP port numbers. Up to 254 unique flows can be identified, where a flow represents a stream of Ethernet frames from a specific source to a specific destination.

Flows are tagged with time stamps and packet count. The identification is based on the classification parameters with optional masking. All other traffic, excluding network management traffic such as ARP and ICMP-PING, is optionally discarded or else monitored via the catchall parser slot-ID 254. The KAD/EBM/102 replies to ARP requests and ICMP-PING requests. The KAD/EBM/102 can optionally operate in a promiscuous mode, which allows it to observe all traffic on the link, not only packets that are addressed to it. 

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • 1000BASE-T IEEE 802.3 standard compatible Gigabit Ethernet interface over copper cabling
  • Monitors a single network link
  • Parses (triple buffers) and classifies Internet Protocol v4 (IPv4) packets
  • Identifies and monitors 254 different flows plus one catchall
  • Supports flow identification on selected frame fields (8 x 16-bit fields) such as Ethernet MAC addresses, IP addresses, Layer 3 (User Datagram Protocol/File Transfer Protocol (UDP/TCP)) fields, and Layer 4 application layer fields such as Stream Identifiers
  • Can be programmed to operate in promiscuous mode
  • Programmable speeds of operation 10BASE-T, 100BASE-TX, 1000BASE-T or auto
  • Features valid and error frame counters and error detection on Ethernet and IP layers
  • Supports a maximum IP packet size of 1,500 bytes

Applications

  • Monitoring, recording, diagnosis and troubleshooting of Ethernet network traffic
  • Detection of system failures and performance problems
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 software allows you to configure DAUs, network switches, recorders and ground stations in an integrated environment. The software is optimized for multi-core platforms with a...

KAD/ABM/103 ARINC-429 bus monitor parser/packetizer - 24 channels

KAD/ABM/103 ARINC-429 bus monitor parser/packetizer - 24 channels

The KAD/ABM/103 is an ARINC-429 bus monitor which combines the capabilities of a coherent message parser with the flexibility of an iNET-X packetizer and an error-detection function, on a single...

KAD/EBM/101 Ethernet bus monitor parser - 1 channel

KAD/EBM/101 Ethernet bus monitor parser - 1 channel

The KAD/EBM/101 is designed to accept Fast Ethernet (100BASE-TX) traffic, then parse it and distribute it to other Acra KAM-500 modules. Ethernet traffic is parsed on the IP layer. The KAD/EBM/101...

KAD/EBM/103 Parser for ARINC-429 on an ARINC 664 Part 7 (A664P7) network

KAD/EBM/103 Parser for ARINC-429 on an ARINC 664 Part 7 (A664P7) network

The KAD/EBM/103 is designed to accept 100BASE-TX Ethernet traffic, then parse it and distribute it to other Acra KAM-500 modules. The KAD/EBM/103 parses A664P7 traffic on the Rockwell Collins Pro...

KAD/ENC/106 IRIG-106 PCM encoder (PMF output)

KAD/ENC/106 IRIG-106 PCM encoder (PMF output)

The KAD/ENC/106 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Multiple KAD/ENC/106 modules can be included in a KAM-500 system and parameters can be sent to some or...

KAD/MBM/102 MIL-STD-1553 bus monitor parser/packetizer - 4 channels dual redundant

KAD/MBM/102 MIL-STD-1553 bus monitor parser/packetizer - 4 channels dual redundant

The KAD/MBM/102 is a MIL-STD-1553 bus monitor, which can monitor up to four dual redundant busses. It combines the capabilities of a coherent message parser, with the flexibility of an iNET-X...

CONTACT SALES/SUPPORT


Products

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic