KAD/EBM/102 1 channel Gigabit Ethernet Bus Monitor
1 channel Gigabit Ethernet bus monitor parser
The KAD/EBM/102 can operate on 10BASE-T, 100BASE-TX and Gigabit Ethernet (1000BASE-T) links and parse Ethernet frames. This allows the data within the parsed Ethernet frames to be distributed to other KAM-500 modules. The KAD/EBM/102 can classify traffic using 8 x 16-bit frame fields such as MAC addresses, IP addresses, IP length, protocol type (UDP/TCP), UDP or TCP port numbers. Up to 254 unique flows can be identified, where a flow represents a stream of Ethernet frames from a specific source to a specific destination.
Flows are tagged with time stamps and packet count. The identification is based on the classification parameters with optional masking. All other traffic, excluding network management traffic such as ARP and ICMP-PING, is optionally discarded or else monitored via the catchall parser slot-ID 254. The KAD/EBM/102 replies to ARP requests and ICMP-PING requests. The KAD/EBM/102 can optionally operate in a promiscuous mode, which allows it to observe all traffic on the link, not only packets that are addressed to it.
- REQUEST A QUOTE
- Monitors a single 1000BaseT, IEEE 802.3 standard compatible, Gigabit Ethernet interface over copper cabling
- Coherently parses and classifies IPv4 packets up to 1,500 bytes and tags for up to 254 different flows and one catchall flow
- Supports flow identification on selected frame fields (8 × 16-bit fields) such as Ethernet MAC addresses, IP addresses, Layer 3 (UDP/TCP) fields, and Layer 4 application layer fields such as stream identifiers
- Monitoring, recording, diagnosis and troubleshooting of Ethernet network traffic
- Detection of system failures and performance problems
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/ABM/103 is an ARINC-429 bus monitor which combines the capabilities of a coherent message parser with the flexibility of an iNET-X packetizer and an error-detection function, on a single...
The KAD/EBM/101 is designed to accept Fast Ethernet (100BASE-TX) traffic, then parse it and distribute it to other Acra KAM-500 modules. Ethernet traffic is parsed on the IP layer. The KAD/EBM/101...
The KAD/EBM/103 is designed to accept 100BASE-TX Ethernet traffic, then parse it and distribute it to other Acra KAM-500 modules. The KAD/EBM/103 parses A664P7 traffic on the Rockwell Collins Pro...
The KAD/ENC/106 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Multiple KAD/ENC/106 modules can be included in a KAM-500 system and parameters can be sent to some or...
The KAD/MBM/102 is a MIL-STD-1553 bus monitor, which can monitor up to four dual redundant busses. It combines the capabilities of a coherent message parser, with the flexibility of an iNET-X...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.