KAD/ENC/005 IRIG-106 PCM encoder - 1 channel

The KAD/ENC/005 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Frame configuration is versatile and fully IRIG-106 compliant. Parameters to be transmitted are stored in predefined locations in RAM. Each parameter has a word definition that includes the location in RAM, bits per word, MSB sent first/last and parity. This definition controls the RAM reader and the parallel-to-serial converter. The KAD/ENC/005 has differential ended (D/E RS-422) outputs for data and clock along with buffered TTL outputs for NRZ-L and the four bit/word/minor-frame/major-frame pulses. Multiple KAD/ENC/005 modules can be included in a KAM-500 system and parameters can be sent to some or all of the encoders. For example, a system can have two encoders using different codes, data rates, word lengths and frame lengths. The only restriction is that an integral number of major frames be transmitted per acquisition cycle.

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • 100% IRIG-106 compliant
  • Fully software programmable
  • Up to 14 PCM codes at up to 16 Mbps
  • 2 to 32K words per major frame
  • 1 to 8K words per minor frame
  • 4 to 64 bits per word (programmable word by word)
  • Odd, even or no parity (programmable word by word)
  • Supports any sync. word and sub-frame strategy

Applications

  • Encode data in IRIG-106 Ch.4 PCM stream
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/BCU/140 Ethernet backplane controller - IENA/iNET-X compatible with TFTP programming

KAD/BCU/140 Ethernet backplane controller - IENA/iNET-X compatible with TFTP programming

The KAD/BCU/140 is a full-duplex Ethernet Acra KAM-500 backplane controller, programmer, and IPv4 packet generator with a link speed of 100BASE-TX. Upon reception of a programming packet, the...

KAD/ENC/106 IRIG-106 PCM encoder (PMF output)

KAD/ENC/106 IRIG-106 PCM encoder (PMF output)

The KAD/ENC/106 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Multiple KAD/ENC/106 modules can be included in a KAM-500 system and parameters can be sent to some or...

KAD/ENC/111 CCSDS encoder (Ethernet interface, internal 64 MB memory buffer)

KAD/ENC/111 CCSDS encoder (Ethernet interface, internal 64 MB memory buffer)

The KAD/ENC/111 is a CCSDS encoder with Ethernet interface and a 64 MB internal memory buffer. It is used to wrap UDP packets received over Ethernet into CCSDS frames of fixed length of 1,279...

CONTACT SALES/SUPPORT


Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic