KAD/TBM/101 1 channel TTP Bus Monitor
1 channel, Dual Redundant TTP Bus Extractor / Packetizer
The KAD/TBM/101 is a TTP bus monitor, which extracts TTP messages. It can also capture every TTP frame on the bus without any filtering (packetizer).
It combines a coherent message extractor and packetizer functions in a single module.
The extractor function buffers up to 128 complete messages and their associated status bits in triple buffers. The message size is 32 bits with 10 bits of status. The packetizer captures every TTP frame on the bus and wraps the entire frame in an iNET-X packet.
- REQUEST A QUOTE
- Monitors a single dual-redundant (TPP) bus
- Up to 128 messages can be extracted
- Packetizer which captures every TPP frame on the bus
- Can monitor asynchronous bus with data rate up to 5Mbps (MFM/Manchester over RS-485)
- Start of cluster cycle is time tagged
- Silent (monitor only; does not transmit or acknowledge)
- Extractor and packetizer can be configured to remove redundancy
- TTP bus monitor
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.