KAM/BIT/102 Network Built-in Self Test module with event packetizer

The KAM/BIT/102 is a Continuous Built-In Test (CBIT) module which checks the Acra KAM-500 backplane and user-modules to verify correct system operation. The KAM/BIT/102 measures the precise value of the ±12V, ±7V and +5V power lines to ensure they are within specifications. Temperature sensors are located at the top block and the center of the module to allow the measurement of both the chassis top block and internal temperatures.

The KAM/BIT/102 checks the format and duration of each acquisition cycle and monitors correct operation by performing a checksum of all addresses transferred on the backplane.  

The KAM/BIT/102 module can be used to check both analog signal conditioning modules and bus monitor modules in a chassis. Channels on analog modules are checked to ensure that the signal stays within a set range. The KAM/BIT/102 can check the STATUS register from each bus monitor module to indicate when a user-defined error or event condition occurs. 

The KAM/BIT/102 generates and transmits event packets containing a user-defined text string and the parameter value that triggered the condition. The module is programmed by associating text strings with each configurable condition. When there is an ongoing triggered condition, a maximum of one event packet per second is transmitted for each configured event condition.

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • Provides up to 127 programmable error and event conditions
  • Includes voltage and temperature monitors
  • Monitors format running and address checksum
  • Monitors status from bus monitors
  • Counts number of power-ons and total time powered on
  • Selected errors and events are transmitted as time tagged event packets in a network
  • Selected errors and events have user programmable text that is transmitted in the event packet payload
  • Event packets are transmitted only when a given error or event condition occurs

Applications

  • Networked system monitoring
  • Health and status reporting
KAM/CHS/13U Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 user-slots (extended temperature)

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

NET/SWI/101

NET/SWI/101 - Gigabit Ethernet Switch

The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.   The NET/REC/001 can be configured via...

CONTACT SALES/SUPPORT


Products

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright
Sales

CONTACT SALES

Contact our sales team today to learn more about our products and services.

YOUR LOCATION

PRODUCT INFORMATION

Support

GET SUPPORT

Our support team can help answer your questions - contact us today.

REQUEST TYPE

SELECT BY

SELECT Topic