KAM/PSU/012 Power Supply Unit
+5V, ±7V and ±12V power supply unit for Acra KAM-500 chassis with 6-way connector
The KAM/PSU/012 converts the nominal 28V aircraft power into the voltages needed by the KAM-500 backplane. The DC/DC converters used are the largest components of any KAM-500 module, so the unit is split in two (one half at each end). This allows the components to be bolted to the housing and their weight to be evenly distributed in the KAM-500 chassis.
The +5V supply is primarily for digital circuitry, the ±12V supply is primarily for analog circuitry, and the ±7V is exclusively for bridge excitation. Unlike other KAM-500 modules the KAM/PSU/012 can only be removed by first removing the sides. The KAM/PSU/012 is only supplied as part of the housing. The green LED indicates power on the +5V power line. For the KAM/PSU/012/NC, power glitch reservoir capacitors are removed.
- REQUEST A QUOTE
- Supplies +5V, ±7V and ±12V for backplane
- Fully isolated
- No derating with temperature (-40 to +85°C)
- Capacitor back-up: 24 ms dropping from 28V @ 40W typical (not applicable for KAM/PSU/012/NC)
- Reverse polarity protection
- Indefinite short-circuit protection
- EMI filtering
- Supplies up to 5A on +5V power line
- Power supplies for data acquisition systems
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.