KAD/SWI/107 Ethernet Tap Module 4-port

  • Downloads
  • SPECIFICATIONS
  • SUPPORT
  • REQUEST A QUOTE

Features

  • Four Ethernet ports configured as two tap ports (ingress) and two aggregator/monitor ports (egress)
  • The tap port pair can be configured as either 10BASE-T or 100BASE-TX; the aggregator/monitor ports can only be configured as 100BASE-TX
  • Ethernet traffic is forwarded between the ports of the tap port pair using a straight-through connection and a copy is forwarded to both of the aggregator/monitor ports
  • No traffic from either of the aggregator/monitor ports is forwarded to the tap ports
  • Store-and-forward operation for aggregation of tap traffic to monitor ports
  • Industrial temperature operation (-40 to +85°C)
  • Live at power-up (static internal routing; no MAC address learning time delays)

Applications

  • Airborne network tap to aggregate data from an external aircraft 10/100BASE-TX Ethernet network
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 Slots

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

NET/SWI/101 Ethernet Switch

NET/SWI/101 - Gigabit Ethernet Switch

The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...

KAD/DSI/102 Discrete input (programmable counters, time tagging) - 24 channel

KAD/DSI/102 24 channel Digital Module

The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

KAD/VID/106 H.264 Video Encoder

The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...

KAD/MAT/101 Microcontroller-based module

KAD/MAT/101 Microcontroller-based module

The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...

KAD/ADC/136 Flexible ADC (full/½-bridge, ICP, PT100, thermocouple, FIR/IIR, 12.5 kHz b/w) - 8 channels at 50 ksps

KAD/ADC/136 8 channel Flexible ADC

The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...

12 channel ADC

KAD/ADC/135 12 channel Full/½-bridge ADC

The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...

KAM/CHS/04L Acra KAM-500 chassis, narrow form - 4 user-slots

KAM/CHS/04L Acra KAM-500 chassis, narrow form - 4 user-slots

The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit.   The backplane has four slots for...

KAM/CHS/03F Acra KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots

KAM/CHS/03F Acra KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots

The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit.   The backplane has three slots for...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.   The NET/REC/001 can be configured via...

CONTACT SALES/SUPPORT


4 Input, Ethernet Tap

The KAD/SWI/107 is an Ethernet tap module designed for operating in harsh environments. All connections use copper cabling, minimum specification CAT5.  

Two individual ports of the KAD/SWI/107, which together implement a tap on the Ethernet link, are referred to as a tap port pair. One of these ports is referred to as the tap port; the other port is referred to as the paired tap port.  The tap port pair may be configured as 10BASE-T or 100BASE-TX and connect to the external Ethernet network. The pair of aggregator/monitor ports can only be 100BASE-TX and connect directly to an Ethernet sink device such as a NET/REC/001 or a KAD/EBM/101. 

The KAD/SWI/107 provides an active non-intrusive mechanism to monitor the traffic on an external network. Traffic received on each of the tap ports is forwarded to both of the aggregator/monitor ports and the paired tap port. The traffic forwarded to both the aggregator/monitor ports is identical, which allows for the data to be simultaneously recorded, analyzed, displayed, and parsed. Traffic received on the aggregator/monitor ports is not forwarded to the tap port pair. 

There is a network activity register for each tap port that counts the number of packets received through each port and the packets forwarded through the other three ports during a one-second interval. Both registers can be read over the backplane.