The MBIM-232D-2 is a 2-channel RS-232 bus monitor module for use in MEDAU/MCDAU/MnACQ/MWDAU-2000 series products.
Features
- 2-channel RS-232/422/485 bus monitor module
- Compatible with RS-232 Honeywell PPT Transducers, Model PPT, PPT-R and PPT2
- Compatible with Rosemount Micro Air Data Transducer (Model 2014MB)
- Compatible with Paroscientific Pressure Transducers (Series 1000, 6000, and 9000)
- Compatible with Kulite pressure scanner model KMPS-1-32/64
- Programmable RS-232 characteristics:
- RS-232, RS-422 or RS-485 operation
- Baud rates from 50 to 230,400 Baud (921,600 in Kulite mode)
- 5, 6, 7, or 8 data bits
- 1, 1.5, or 2 stop bits
- Odd, even, or no parity
- Timestamp per channel with high, low, and micro time
- Multiple operating modes:
- Available on a per-channel basis
- FIFO, current value table, or double buffer mode
- One (1) external sync. pulse provided for per channel
- Multiple modules in a single chassis
- Programmable data organization to pack two bytes into one PCM word and select which byte is the most significant byte
- Data packetization modes
- Gap intervals in increments of 10ms or 249us w/message length qualification
- Sync patterns of 3 to 6 bytes in length w/message length qualification
- Alternating sync patterns of 2 or 3 bytes per pattern
- PCM format controlled and sync pulse output for external system synchronization
- Microsoft Windows application software included
Applications
- Aircraft instrumentation
- Avionics
- Lab test
The MnACQ-2700 is a dual gigabit (1000BASE-T) port miniature networked data acquisition and encoding unit that supports simultaneous bulk and selected data into multiple industry standard formats.
The ADAU-2016 is a 16 user-slot Axon chassis, which along with the housing and backplane, includes an isolated 100W power supply for the controller and user modules.
IADS RTStation is a complete real-time and post-test display and analysis software suite and is scalable from a laptop to a large workgroup through its client/server software architecture.
The nREC-7000 is a high-speed network recorder for use with flight test data acquisition and multiplexing units, recording on two 10GBASE-SR ports and two 1000BASE-T ports.
The TTS-9800-2 series multiband, multimode transmitter provides the user with state-of-the-art modulation, forward error correction, and space-time processing compatibility to IRIG-106-15.
The TTC NSW-12GT is a rugged 12-port Ethernet switch that enables multicast data to be accurately distributed between nodes with precise timing.
MBIM-232D-2 2-Channel RS-232/422/485 Bus Monitor Module
The MBIM-232D-2 is a 2-channel RS-232 bus monitor module for use in MEDAU/MCDAU/MnACQ/MWDAU-2000 series products. The module supports serial communications per the EIA-RS-232 standard at baud rates from 50 baud up to 230.4 Kbaud on a per channel basis (921.6 Kbaud in Kulite mode). High, low, and micro timestamping are provided on a per-data packet basis.
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.