Speed and Security of Industry’s Leading CSfC NAS Solution Boosted to Support Increasing ISR Data
New DTS1+ upgrades the DTS1, industry’s first COTS DAR storage solution with two layers of full disk encryption in a single device, with ~2x faster Ethernet data rates (190MB/s write and 220MB/s read) and enhanced encryption
ASHBURN, Va. – March 7, 2023 – Curtiss-Wright’s Defense Solutions division, a leading developer and supplier of Modular Open Systems Approach (MOSA) rugged data storage and protection solutions for the U.S. Department of Defense (DoD), has introduced the next generation of its popular DTS1 Data Transport System. The new DTS1+ single slot network attached storage (NAS) device features enhanced performance and capabilities while retaining the same form/fit/function as the DTS1, industry’s first commercial off-the-shelf (COTS) data-at-rest (DAR) storage solution to support two layers of full disk encryption (FDE) in a single device. The DTS1+ is designed to store and protect large amounts of data on helicopters, fighters, unmanned aerial vehicles (UAV), unmanned underwater vehicles (UUV), unmanned ground vehicles (UGV), and intelligence surveillance reconnaissance (ISR) aircraft that require the protection of sensitive DAR to international standards.
The original DTS1 data recorder is the embedded industry’s first COTS DAR storage solution designed to support Commercial Solutions for Classified (CSfC) with 2-Layers of encryption in a single device. CSfC is an NSA-approved approach for protecting classified National Security Systems (NSS) information in aerospace and defense applications that uses cost-effective commercial encryption technologies in a layered solution. It is also the only Common Criteria-certified NAS solution approved by the NSA and approved by NATO with two certified encryption layers. Curtiss-Wright has formally commenced the Common Criteria (ISO-15408) certification process for DTS1+, which is currently undergoing certification for CSfC, with completion expected later in 2023.
“The great success of our original DTS1 data recorder, with hundreds fielded today, results from its ability to deliver a turnkey solution for NSA approved CSfC with two layers of full disk encryption in a single device, eliminating the need for system integrators to combine two independent encryption layers,” said Chris Wiltsey, Senior Vice President and General Manager, Curtiss-Wright Defense Solutions division. “Our new DTS1+ takes this further, with faster Ethernet data transfer rates and enhanced hardware encryption all while reducing program risk, schedule risk, and cost.”
With nearly double the Ethernet data rates (190MB/s write and 220MB/s read) of its predecessor, the DTS1+ also integrates the latest generation hardware encryption device, which supports FIPS 140-2 Level encryption via 128-bit AES-XTS. The compact, single-slot CSfC Certifiable DTS1+ also supports the same external cables and Removable Memory Cartridges (RMC) used with the DTS1, for storage up to 8 TB per RMC.
The very small DTS1+ NAS device weighs only 3.77 lb. (1.71 kg) and measures only 1.5 x 5.0 x 6.5” (38.1 x 127 x 165.1 mm). The DTS1+ supports PXE protocol so that network clients on a vehicle or aircraft can quickly boot from the encrypted files on the DTS1+’s RMC storage unit. This approach both facilitates software updates for network clients and significantly reduces SWaP by eliminating the need for individual hard disks in each network client. Curtiss-Wright offers two mounting options, the VS-DTS1+SL-FD, which is designed for cockpit use with DZUS mounting panel, and the VS-DTS1+SL-F, which uses L-brackets to support very flexible mounting within space-constrained platforms.
The DTS1+ enables any network-enabled device to retrieve stored data or save newly captured data. It supports networked devices using heterogeneous operating systems (Linux®, VxWorks®, Windows®, etc.) that support industry-standard NAS protocols (i.e., NFS, CIFS, FTP, or HTTP). The DTS1+ also supports iSCSI protocol for block data storage and PCAP protocol for Ethernet packet capture.
About Curtiss-Wright Corporation
Curtiss-Wright Corporation (NYSE:CW) is a global integrated business that provides highly engineered products, solutions and services mainly to Aerospace & Defense markets, as well as critical technologies in demanding Commercial Power, Process and Industrial markets. Headquartered in Davidson, North Carolina, the company leverages a workforce of 8,000 highly skilled employees who develop, design and build what we believe are the best engineered solutions to the markets we serve. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing innovative solutions through trusted customer relationships. For more information, visit www.curtisswright.com.
Note: Trademarks are property of their respective owners.
Director of Public Relations
John Wranovics has over thirty years of experience in managing media relations and the promotion of high technology products. He has been with Curtiss-Wright since 2003. He has a degree in English Literature from the University of California, Berkeley.
DTS1 & DTS1+: 1-slot Rugged Network Attached File Server
The DTS1 and DTS1+ Data Transport Systems provide easy to use, turnkey, rugged network File Servers in Unmanned Aerial Vehicles (UAV), Unmanned Underwater Vehicles (UUV), and Intelligence Surveillance Reconnaissance (ISR) aircraft. The DTS1+ is the next-generation solution for the DTS1 product.