BIM-232D-4

BIM-232D-4

The BIM-232D-4 is a 4-channel RS-232 bus monitor card for use in Curtiss-Wright’s EDAU/CDAU/WDAU/nDAU-2000 series products. The card supports serial communications per the EIA-RS-232 standard at baud rates from 50 baud up to 460.8 Kbaud on a per-channel basis (921.6 Kbaud in Kulite mode). One channel operation up to 921.6 Kbaud per channel pair. High, low and micro timestamping are provided on a per-data-packet basis.

Key Features

4-channel RS-232/422/485 bus monitor card
Compatible with RS-232 Honeywell PPT Transducers, Model PPT, PPT-R and PPT2
Compatible with Rosemount Micro Air Data Transducer (Model 2014MB)
Compatible with Paroscientific Pressure Transducers (Series 1000, 6000, and 9000) (Output data formatted as IEEE-754 32 bit or scaled 16 bit binary format)
Compatible with Kulite pressure scanner model KMPS-1-32/64
Programmable RS-232 characteristics:
- RS-232, RS-422 or RS-485 operation
- Baud rates from 50 to 460,800 Baud (921,600 in Kulite mode)
- 5, 6, 7, or 8 data bits
- 1, 1.5, or 2 stop bits
- Odd, even, or no parity
Timestamp per channel with high, low and micro time
As a bus monitor:
- Supports EIA-RS-232 standard
Multiple operating modes:
- Available on a per-channel basis
- FIFO, current value table or double buffer mode
One (1) external sync. pulse provided per channel
Multiple cards in a single chassis
Programmable data organization to pack two bytes into one PCM word and select which byte is the most significant byte
Data packetization modes:
Gap intervals in increments of 10ms or 249us w/message length qualification
Sync patterns of 3 to 6 bytes in length w/message length qualification
Alternating sync patterns of 2 or 3 bytes per pattern
PCM format controlled and sync pulse output for external system synchronization
Microsoft Windows application software included