KAD/ENC/111 CCSDS Encoder

flight test and monitoring family header
KAD/ENC/111 CCSDS Encoder
Product Sheet
Product Sheet

The KAD/ENC/111 is a CCSDS encoder with an Ethernet interface and a 64 MB internal memory buffer.
 

Features

  • Receives data over Ethernet and generates CCSDS frames
  • Filters packets using stream ID
  • 64MB memory buffer
  • Four RS-422/485 outputs
  • Programmable bit-rate from 250kbps to 4Mbps
  • CCSDS frames of fixed length of 1,279 bytes
  • Reed Solomon (255,223) and Randomizer according to ECSS-E-ST-50

Applications

  • RF data links
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

KAD/ENC/111 CCSDS Encoder

The KAD/ENC/111 is a CCSDS encoder with an Ethernet interface and a 64 MB internal memory buffer. It is used to wrap UDP packets received over Ethernet into CCSDS frames of fixed length of 1,279 bytes. The KAD/ENC/111 has two modes of operation, which can be controlled from the KAM-500 backplane. In the first mode, the module interleaves real-time data received over Ethernet with idle data generated by the module.

In the second mode, the module interleaves real-time data received over Ethernet with data read from the internal memory buffer. There are two ways to switch the KAD/ENC/111 between modes, either by the internal timer (default) or by command from another KAM-500 module through the backplane. The module has four RS-422/485 outputs which are buffered copies of the single CCSDS channel.

 

Aerospace Instrumentation Brochure

Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions. 

Learn More