


The KAD/ADC/130 is used to condition and digitize up to four D/E analog channels.
Features
- Four differential ended input channels
- Input range (±200V)
- High accuracy (0.05% FSR typical)
- 16-bit simultaneous sampling on each channel
- Up to 12k samples per second per channel
- Up to 3 kHz Bandwidth (AAAF filter)
Applications
-
Analog Signal Acquisition
-
Differential high voltage (±200V) measurement
KAD/ADC/130 4-channel ±200V Differential ended ADC
The KAD/ADC/130 is used to condition and digitize up to four D/E analog channels. At the heart of the KAD/ADC/130 is a hard-wired state machine that over-samples all channels at a rate between 48 ksps and 96 ksps and digitally filters any noise above the user-programmable cutoff frequency.
This is achieved using cascaded, half-band, Finite-Impulse-Response (FIR) filters followed by an 8th order Butterworth IIR filter with a default cutoff point set at one-quarter of the sampling frequency (fc = fs/4). All signals are sampled simultaneously. Thus, when several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels will be aligned.
The KAD/ADC/130 is available with a ±200V input range. Please contact us using the support tab below if another range is required or for further details.
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.