KAD/CDC/002 24 Channels Current-to-Digital Converter

flight test and monitoring family header
KAD/CDC/002 24 Channels Current-to-Digital Converter
Product Sheet
Product Sheet

The KAD/CDC/002 is used to condition and digitize up to 24 differential-ended current channels.
 

Features

  • 24 current input channels
  • Simultaneous 14-bit sampling for each channel
  • Input range ±20 mA
  • Accuracy: ±0.5% FSR for input range ±20 mA
  • Programmable range and filter cutoff for each channel
  • For use with 4-20 mA transmitters
  • Short to ground on any channel does not affect others
  • Up to 17,500 samples per second per channel
  • Up to 1.1 kHz bandwidth

Applications

  • Current measurements
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

KAD/CDC/002 24 Channels Current-to-Digital Converter

The KAD/CDC/002 is used to condition and digitize up to 24 differential-ended current channels. At the heart of the KAD/CDC/002 is a hard-wired state-machine that over-samples all channels and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band, decimate by 2, 15-tap, Finite-Impulse-Response (FIR) filters with 32-bit coefficients. All signals are sampled simultaneously. Secondary gain and offset are achieved digitally according to a specified range.

 

Aerospace Instrumentation Brochure

Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions. 

Learn More