The KAM/CHS/09U is a nine-user-slot KAM-500 chassis that includes a power supply module that regulates power supplies for the backplane.
Key Features
- Power supply unit and nine user-slots
- 18 to 40 VDC isolated power supply
- Rugged aluminum housing
- 8 MHz x 16-bit digital backplane
- Operates as master or slave in distributed system
- LED power-on indicator
Applications
- Flight test instrumentation systems
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate over copper wiring, supporting straight-through or cross-over cables.
KAD/DSI/102 monitors the status of up to 24 differential ended discrete input channels. Each of these has an assigned programmable 32-bit counter.
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs.
The KAD/MAT/101 allows you to run your own programs based on a dual-core C6000DSP+ARM9 microcontroller. It provides high-performance DSP functions.
KAD/ADC/136 is used to condition & digitize up to 8 analog channels.
The KAM/CHS/04L is a compact four user-slot KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit.
The KAM/CHS/03F is a compact three-user-slot KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit.
The KAM/CHS/13U is a thirteen user-slot Acra KAM-500 chassis that includes a power supply module that regulates power supplies for the backplane.
KAM/CHS/09U Acra KAM-500 Chassis - 9 User-Slots
The KAM/CHS/09U is a nine user-slot KAM-500 chassis, which along with the housing and backplane, includes a power supply module that regulates power supplies for the backplane (isolated 28V nominal in). The backplane has nine connectors for user modules, which are polarized to prevent the insertion of the backplane controller module. The backplane distributes power and connects address, data, and control lines to the user modules The only ICs on the backplane are demultiplexers for user-module select signal. Any user module can be placed in any user slot in any combination. 2.0A is available for bridge excitation.
Aerospace Instrumentation Brochure
Modern aerospace instrumentation systems can be highly complex, and it can be difficult to know how to meet program needs. It’s not unusual for requirements to change during a campaign and cause significant delays, and data must be captured reliably no matter what – otherwise expensive additional flights will be needed or months of program data could be lost. Read our brochure to learn how you can reduce your risk with commercial off-the-shelf (COTS) solutions.